The VendingMiser® reduces energy consumption of refrigerated beverage vending machines by an average of 46% – typically $150 per machine, all while maintaining product temperature.*
Installed in minutes either on the wall or on the vending machine, the VendingMiser is compatible with all types of cold drink vending machines and incorporates innovative energy-saving technology into a small plug-and-play device. The VendingMiser is an occupancy-based energy control product that controls refrigerated beverage vending machines. It uses a Passive Infrared Sensor (PIR) to power down the machine when the area surrounding it is vacant. Then it monitors the room’s temperature and automatically re-powers the cooling system at one to three hour intervals, to ensure the product stays cold. VendingMiser’s microcontroller will never power down the machine while the compressor is running and when the machine is powered up, the cooling cycle is allowed to finish before powering down. A cold beverage vending machine consumes on average 400 watts, costing approximately $300 per year to operate at 10 cents per kWH. Powering down such a vending machine when not in use provides savings of $150 or more per year per machine. *Savings can vary based on electricity rate
VM150 VendingMiser with PIR Sensor
VM151 VendingMiser only
VM160 Weatherproof VendingMiser with PIR Sensor
VM161 Weatherproof VendingMiser only
VM170 Easy-Install VendingMiser with PIR Sensor
VM171 Easy-Install VendingMiser only
VM180 Weatherproof Easy-Install VendingMiser w/PIR Sensor
VM181 Weatherproof Easy-Install VendingMiser only